Tuesday, February 23, 2016

Fixes for Kitchen Backsplash Switches & Outlets

Sometimes there just isn't room to fit an electrical box vertically on your kitchen backsplash or bathroom tile. A great solution is to simply mount your kitchen outlets and light switches horizontally instead.



I've seen this in many kitchens by the sink where the half-backsplash wall tile or marble leaves little room for electrical devices. Usually it's when there's a ledge that opens up into another room or a split-level island that has a breakfast bar.

In some cases, switches have been mounted sideways but too close together for the cover plates. In that case, you can use plates in which the openings have been shifted to create a short side. Then, you can put the short ends of the plates together like this:


This looks like 2 normal cover plates, but if you look closely, you'll see that where they meet in the middle the screws are closer to the edges of each plate than on the outside edges. Here's what a single plate looks like:



See how the rocker opening and screw holes have been shifted to one side of the plate?

Using these half short wall plates made for kitchen tile or granite backsplashes is an excellent solution when you don't have room for a regular switchplate.

They also come as short duplex outlet covers and as short toggle plates for tight spaces too.



Switch plates with shorter edges are the only solution f you've remodeled your kitchen and run into this problem:

"Oops! My horizontally mounted kitchen switches are too close together for cover plates!"

It's a common problem that we get calls about so often that we've custom created these plates with you in mind. You're welcome!

For more tricky switch plate solutions see our post on Narrow Switch Plates for Tight Spaces.