Get Your Outlet or Switch to Sit Flush with Wall

When your home is built, the outlets and switches are all installed flush with the drywall. But if you add decorative elements to your walls - a tile backsplash in a kitchen or wainscoting in your entry way - you'll find that your electrical box ends up recessed, making it difficult to put the switch plate cover back on.

There are 2 ways to fix a recessed electrical plug - with spacers or a goof ring.

Raise an Outlet with Spacers

Spacers are really easy to use. They come in a strand and can be folded over to reach your desired height (in increments of 1/8"). Simply fold the strand to the thickness you need and cut off the excess.

Buy electrical device spacers here.

Keep in mind you may need a longer screw if you raise your outlet more than 3/8 of an inch.

Raise an Outlet with a Goof Ring

If you need to lift your plug up from your electrical box, but 1/8" increments won't fix your situation, get a goof ring.

Goof rings slide into your electrical box and the tabs rest on your new surface - for instance, a black granite backsplash. Then, your receptacle can be installed over it to sit flush with your wall, tile or wainscoting.

They are also made for 2 devices here.

Whether wall tile, paneling, board & batten, beadboard, granite, corrugated metal or shiplap is creating a problem, you can easily fix it using one of these 2 safe solutions for recessed plugs and light switches.

You've never - and I mean NEVER - seen a switch plate THIS BIG before!

As we've mentioned before in our Large Switch Plates post, there are times when a standard sized light switch cover won't do. It doesn't take much to over-cut your sheetrock or tile, which is why we carry oversized switch plates in a variety of sizes and finishes.

But we were still getting the occasion phone call for something bigger. "Say that again?" we'd ask. "You need a faceplate larger than 6 inches?"

That's right, there are some really big "eh oh's" out there and to help out we've created a custom super huge switch plate that's, drum roll please....a whopping 7.5" tall by 5.5" wide for a single switch. So when you've make a really, really big mistake, we've gotcha covered. Literally. You're welcome :)

Whether you just need an extra inch or an extra 3 inches, shop jumbo wall plates at Kyle Switch Plates. We keep our faceplates and electrical outlets in stock, right in our California warehouse so they're ready to ship when you order.

#remodel #switchplates #oversizedswitchplate #fix