Replacement Covers for NuTone Light, Vent & Heat Switches [with labels]

If you're updating a bathroom and want to replace your dingy old NuTone light, vent and heat covers, we'll show you how.

Here are three examples of NuTone switches & covers commonly found in bathrooms:

1. Vent, Heat, Light & Night Light:

This nickel NuTone cover fits over 4 horizontal toggle switches that control the bathroom fan, lights and overhead heater.

Black imprinting labels each of the 4 switch functions.

Note that there are different switches shown in plate #1 and plate #2 above. The white switches in example 1 are larger than the ivory switches in example 2.

Example 1's switches are horizontal toggles and fit the same switch plate opening as a duplex outlet for 2 plugs. Learn more about horizontal toggle covers in our post here.

Buy stacked horizontal toggle switches.

You can buy new covers for 4 horizontal toggles without labels printed on them. Choose from a variety of other finishes or get stainless steel to keep the same look as the original cover.

Note: this is the same cover that is used for electrical outlets.

To add labels to the switches, get adhesive NuTone switch labels and stick them to the plain cover plate.

NuTune switch labels are available in antique silver to match stainless steel plates, but also come in antique brass and can be added to covers in any finish.

The small metal rectangle labels are 3/8" high x 1/2" wide and come with a strong adhesive backing. Simply peel and stick to any wall plate.

This bathroom went through a recent update and the new switches & cover look great:

2. Double-Gang Vent & Heat:

Example #2 is a NuTone HS-94S with 2 stacked switches on the left (labeled VENT & HEAT), and a standard toggle light switch on the right.

Horizontal Toggles & Standard Toggle Light Switches

A replacement plate with no printed labels looks like this:

Horizontal & Vertical Toggle Switch Plate

Vent and heat labels can be added to replacement covers.

3. Single-Gang Light, Vent, Heat:

Example #3 is a NuTone system with 3 stacked switches labeled LIGHT, VENT & HEAT.

These 3 small switches (despard switches) are sold individually and installed in a metal mounting bracket.

NuTone switches like these fit triple despard cover plates.

Since these replacement covers don't have labels, adhesive ones can be added to identify which switch does what.

One option, is to get these NuTone switch vent & heat labels, and stick them to the side of each switch. (These are the same stick-on labels from example one, but in the brass finish.)

Satin brass cover shown with ivory switches and antique brass labels.

Another option is to add this peel-and-stick label for NuTone switches. Which is what this homeowner chose when doing renovations to a basement bathroom.

You can add light switch labels to the left or right of despard style switches.

4. Light Vent Heat (2-Gang Scovill)

Here are the NuTone Scovill switches without the cover:

Note that the switches are in a large square metal strap with 4 screws holding it into the junction box. The screw holes for attaching the cover plate are in the center of the left and right edges of the mounting strap.

If you only need to replace the cover, you get this NuTone Scovill Light Vent Heat Switch Cover.

You can see that the cover (available in ivory and white) doesn't label the switches. You can adhere these light vent heat switch labels to the front of the new plate. Or, create your own method for labeling them.

If you need to replace the switches (despard switches like these), you'll mount them in new metal straps, and the cover plate will be slightly different.

Below, you can see the new despard switch straps hold switches for a single gang, or single slot in the junction box.

The cover plate screws into these straps at the very top and bottom:

You'll mount the switch on the right in the center of the strap, rather than up at the top. You'll need this new cover plate if updating your switches and straps.

This cover is available in stainless steel (shown), polished chrome, white, ivory, satin brass & black. Kyle Switch Plate's light vent heat labels for NuTone covers can be added either above or below each switch.

Update An Intercom to a New Video Doorbell with these Covers

If you want to install a video doorbell in place of your old intercom system, you may find that the large box that held the speaker is much bigger than the cutout necessary for the smart doorbell.

To cover the old intercom speaker hole and mount a new video doorbell, follow the steps listed below.

Caution: 

• Steps are provided as a courtesy to help mount a video doorbell to a back plate that covers a larger opening (from an old intercom speaker). 
• Always adhere to the installation instructions provided with the smart doorbell itself.
• Simply modify installation by attaching the unit to the cover plate instead of the side of your house.

STEP 1: PURCHASE YOUR VIDEO DOORBELL

Choose and purchase a video doorbell unit (such as a Ring doorbell).

Open the package and read all of the installation instructions thoroughly.

Be sure you understand very clearly how the unit is installed.

Note whether it is external or recessed when mounted. And, determine whether you'll be wiring it in or using it wirelessly.

You can see below that the different video doorbell types will be mounted to different plates:

STEP 2: REMOVE YOUR INTERCOM

The next step is to remove the intercom button & speaker completely from the box. If you don't plan to wire in the replacement doorbell, cap off any wires.

You may have a NutTone, TekTone or another vintage brand.

If your particular model has an extra mounting ring (like the one shown below), remove that as well.

STEP 3: MEASURE BOX

Because the old intercom is much larger than the downsized video doorbell models available today, you'll need to cover the box & install the video doorbell unit onto the new box cover.

In order to select the correct new cover, you'll need to get some measurements from the box.

Read through all steps below before purchasing a cover plate!

First, get the height and width needed to cover the box (without leaving any of it exposed).

Next, note if there are any obstructions that will prevent a cover from fitting, such as elevated brick or stone.

If so, measure the largest area in which a cover will fit.

Then, look for the 2 openings where the new cover will be screwed into the box. Note if they are on the sides (horizontal orientation) or at the top and bottom (vertical orientation).

Measure from the center of one screw hole straight across to the center of the other screw hole. The distance should be one of these:
3.281" (3-9/32")
3.75"
4.5" (popular spacing)
5.25" (popular spacing)
6.625" (6-5/8")

You should now have these key measurements:

1. Empty box's height and width.
2. Obstruction's height and width (if any).
3. Screw holes (orientation & space apart).

STEP 4: SELECT A COVER

Follow these steps to narrow down which cover is right for you (based on the information you gathered in Steps 1-3).

You will need to review the installation instructions for your specific video or Ring doorbell model.

You will be selecting from 3 types of covers (each type comes in a variety of sizes with varying screw spacing):

• (A) recessed video doorbell model
• (B) surface mount hard-wired model
• (C) surface mount wireless model

A - If the Doorbell Recesses Into the Wall:

Recessed units that sit back into the wall's surface will need a cover with a large center opening (if going on top of a larger intercom you have removed).

These covers are 6-3/8" high x 4-1/2" wide.

Screw spacing options are 4.5" apart or 5.25" apart, with screws placed top and bottom (vertically spaced).

If your box is larger than 6-3/8" X 4.5", see step 5 below.

Order covers here:

Recessed Video Doorbell Plate with 4.5" Screw Spacing

Recessed Video Doorbell Cover with 5.25" Screw Spacing

B - If the Doorbell is Surface Mount & Hard-Wired:

These covers have a small round opening in the center for the wires to pass through.

Regardless of the size you order, you will be drilling holes into the plate to align with the mounting bracket that comes packaged with your video doorbell (see Step 6).

Available sizes are:

Smaller Covers (6.4 x 4.5):

6-3/8" H x 4-1/2" W with Wire Opening - 4.5" Vertical Screws

6-3/8" H x 4-1/2" W with Wire Opening - 5.25 Vertical Screws

Larger Covers (7.5 x 5.5):

7.5" H x 5.5" W with Wire Opening - 4.5" Vertical Screws

7.5" H x 5.5" W with Wire Opening 5.25" Vertical Screws

C - If the Doorbell is Surface Mount & Wireless:

Get a "blank" intercom cover with 2 screw holes and no other cutouts. You will be drilling holes that align with the camera's bracket. (See Step 6).

Two sizes with various screw spacing options are available:
6.4" x 4.5"
7.5" x 5.5"

Available sizes are:

Smaller Covers (6.4 x 4.5):

6-3/8" x 4.5" Wireless with 4" Vertical Screws

6-3/8" x 4.5" Wireless with 4.5" Vertical Screws

6-3/8" x 4.5" Wireless with 5.25" Vertical Screws

Larger Covers (7.5 x 5.5):

7.5" x 5.5" Wireless with 3.75" Horizontal Screws

7.5" x 5.5" Wireless with 4.5" Vertical Screws

7.5" x 5.5" Wireless with 5.25" Vertical Screws

7.5 x 5.5 Wireless with 6-5/8" Vertical Screws


STEP 5: ORDER GASKETS (IF NECESSARY)

If the new cover isn't quite large enough to completely hide the box, place gaskets underneath the cover.

Here, 2 triple-gang gaskets have been stacked underneath the plate.

Simply trim the moisture gaskets down to match the size of the box underneath the plate.

Again, moisture gaskets are only necessary if the plate isn't large enough to cover the box opening.

To review, note these 4 things about the cover prior to ordering:

1. height and width dimensions (to cover box but not hit any obstructions nearby)
2. placement of screw holes (vertical or horizontal & space between them)
3. any other cutouts needed (for recessed or hard-wired units)
4. are gaskets necessary (if replacement cover is smaller than edge of box)

Use the links above to purchase the cover you need or shop all intercom doorbell speaker covers here.

Once your receive the cover, continue with Step 6.

STEP 6: DRILL HOLES & MOUNT BRACKET

Regardless of the cover size, you will need to drill holes into the plate to align with the mounting bracket that comes packaged with your video doorbell.

Read through all of step 6 prior to drilling your plate.

Drilling into the plate to attach the doorbell's mounting bracket is a similar installation process as if you were mounting directly to the side of your house.

Instead of drilling into the stucco or paneling on your home, you will instead drill and mount the doorbell's bracket to the cover plate.

You will need to add hex nuts (not included) to the back side of the plate to secure the screws that attach the bracket to the plate. Be sure to buy nuts that fit the screws included with the video doorbell's installation hardware.

Note the size of your video doorbell unit and the placement of the cover plate's screw holes. You may need to mount the doorbell off-center on the cover plate in order to complete installation.

Try snapping the doorbell into the bracket and placing it centered on the cover plate prior to drilling any holes. If the screw holes on the plate (for attaching the plate to the box) are blocked, look for a better spot on the plate to position the doorbell bracket.

When ready, drill holes into the plate and attach the bracket.

STEP 7: INSTALL COVER OVER BOX

Use the provided screws to mount the cover (with the installed bracket) to the box.

Be sure to pull any wires through the plate's center opening if you are hard-wiring the doorbell. Otherwise, properly cap off the old wires.

If the doorbell unit itself is mounted without a bracket, follow the installation instructions from the doorbell manufacturer to attach the doorbell to the cover as you would the side of your house.

STEP 8: ATTACH VIDEO DOORBELL UNIT

Once the cover is securely installed to the box (with the doorbell unit's mounting bracket attached per the doorbell manufacturer's instructions), continue to follow manufacturer instructions to attach the doorbell's video unit to the bracket.

STEP 9: COMPLETE INSTALLATION & SETUP

Instructions provided in this post are for modifying the installation process to retrofit the smaller doorbell to a larger intercom box.

They are provided as a courtesy, but do not cover every brand, size or type of doorbell unit.

Be sure to follow proper instructions for wiring and setting up your video doorbell.

STEP 10: SEND US A PICTURE (Optional)

We'd love to see the finished product of your smart video doorbell unit installed on one of our custom-made intercom covers.

Bonus points if you have a "before" picture of your old doorbell speaker.

Here are a couple we've received so far:

Submit pictures to advice@kyleswitchplates.com

We hope this post gives you the confidence to remove your old intercom and upgrade to the security of video surveillance when someone rings your doorbell.

Replacing Your NuTone Door Bell Intercom Cover

If your home has an old door bell with a bulky NuTone intercom speaker, you no longer use it, and you don't want to look at it anymore, you're in the right place.

We received so many calls about covering up old NuTone door bell intercom speakers, Kyle created a custom cover plate as a solution.

Intercom covers are 7.5" x 5.5" with screw holes spaced 4.5" center-to-center. This is a custom measurement created to fit NuTone brand speakers (as shown in image above). They're made in the USA out of .050" thick aluminum, and have been a best seller since we introduced them last Fall.

Buy a blank cover plate for a vintage NuTone intercom here.

To remove an in-wall intercom speaker that has screws on the left and right sides, rather than positioned top-bottom as shown above, here is a blank intercom cover.

Measuring for Your Replacement Nutone Cover

First, remove your intercom cover from the wall.

Then, measure the width and length of the area that needs to be covered (including any damaged wall around the metal frame).

Finally, measure the distance of the screw holes. Note that the correct way to measure distance between screws is from the centers of the screw holes.

This particular intercom speaker needed a 7.5" H x 5.5" W cover with screws spaced 3.75" apart (center to center). That cover can be purchased here.

Shop all doorbell and intercom cover plates here.